- LEAFLET & VIDEO
- Contact Us
Fatigue testing equipment is often used to determine how a material will perform over time and repeated use.
United Test offer the UTDS series Electronic Dynamic Universal Testing Machine/ Cyclic Testing Equipment widely used at material and components, parts dynamic mechanical property test, include tension, compression, low cycling test, match with high-low temperature chamber can execute the temperature test.
Fatigue testing on an elastomer
1, One control chanel, with load, displacement, deformation three close-loop control, these three control type smoothly switch.
2, Max. close-loop data flash frequency is 6Khz;
3, Controller A/D, D/A resolution is 16 bit, signal generate frequency is 0.001Hz~ 50HZ;
4, Signal generate waveform include sine wave, triangular wave, quare wave, sawtooth wave etc.,;
5, Two levels servo valve driving unit used to drive the servo valve, remote hydraulic pump used to remote control the hydraulic pump station;
Cyclic test EN 397 Compression Testing Industrial Safety Helmets
|Max. static load||±5KN Accuracy ±1%|
|Max. dynamic load||±1kN|
|Dynamic fluctuation||Less than ±1%FS|
|Actuator max. stroke||±100mm|
|Control mode||Load, displacement, deformation|
|Main test waveform||sine wave, triangular wave, quare wave, sawtooth wave etc.,|
|Max. test space||550mm (include test fixture)|
|Standard Power||220/110V, 50/60HZ, 1 phase|
|Working system||MS Win7 / Win10|
|High Stiffness Frame||1 set|
|Servo liner actuator||1 set|
|Servo driver||1 set|
|LVDT (liner displacement sensor)||1 set|
|Test fixture (quote and design according details test sample).||1 set|
|Fully digital servo controller||1 set|
|Professional testing software||1 set|
|Documents (Manual, packing list, certificate)|
Comply with different standards such as ASTM F2606, ASTM F2516, ASTM F2267, ASTM F384, EN 397 etc.,.