- Universal testing machine
- Fixtures
- Biomedical device/equipment
- Vehicles (car, motorcycle)
- Compression/Flexural test
- Hardness tester
- Impact testing machine
- Torsion testing machine
- Abrasion & wear tester
- Plastic & Pipe testing
- Tensiometer / Goniometer
- Erichsen cupping tester
- Other Testing Equipment
- Grinding & polishing machine
- Introduction
- Specification
- Accessories
- Standard
- LEAFLET & VIDEO
- Contact Us
LCT plastic tensile impact testing machine is used to execute tensile-impact test of plastics or insulation materials under defined condition, as tensile tests at relatively high strain rates; measure the tensile-impact strength and permanent break elongation rate, especially for materials too flexible or too thin to be tested use Charpy or Izod impact tester.
This testing machine is widely used in the scientific research unit, the universities, colleges and institutes, the production enterprise and the examination department.
Conform with ISO8256-1990 "Plastic Stretch Impact Intensity Determination" and American standard ASTM D1822 "Plastic And Electric insulation Material Stretch Impact Performance test Method".
Model | LCT-50 | LCT-50D |
Impact energy | 7.5J, 15J, 25J, 50J | 7.5J, 15J, 25J, 50J |
Impact speed | 3.44m/s | 3.44m/s |
Pendulum initial angle | 160° | 160° |
Pendulum center to sample center distance | 311 .06mm | |
Distance between movable and fixed clip block | 25mm, 30mm | |
Movable block weight | 60g, 120g | |
Power | 220V, 50HZ | 220V, 50HZ |
Display type | Dial scale | LCD display |
Loadframe,
pendulum,
supporting vice jaws,
specimen centering plate,
spanner,
manual etc.
ISO8256-1990 "Plastic Stretch Impact Intensity Determination"
ASTM D1822 "Plastic And Electric insulation Material Stretch Impact Performance test Method".