YAW series Compressive Strength Testing Equipment to test cement, brick and concrete is offered by United Test. Range 1000KN, 2000KN, and 3000KN, these strength testing equipment are extremely handy and are easy to use for testing cement, concrete and mortar cubes. We lay utmost importance on equipment design and construct with emphasis on ease of operation.
 
Conform with test standard ASTM C39, this test method consists of applying a compressive axial load to molded cylinders or cores at a rate which is within a prescribed range until failure occurs. The compressive strength of the specimen is calculated by dividing the maximum load attained during the test by the cross-sectional area of the specimen.

Main features:
3.1, The tester is four columns structure, mainframe consist of bottom base, oil cylinder, load cell, compression platen, columns, upper crosshead etc., high stiffness ensure the test process stable.
3.2, Use load cell to measure the force, with high accuracy and good stability, repeatability.
  Heavy duty Load cell
3.3, Fixed test space, use the cushion block to adjust the test space, make the upper crosshead simple structure, no leading screw, no malfunction.
3.4, Column surface chrome coating, rust protect and more beautiful appearance.
3.4, Running noise lower than 60dB.
3.5, Industry computer, easy operation and solid panel (class IP65), anti-shock, rustproof etc., function. 
  Industry computer
3.6, Unitary oil source cabinet, consist of hydraulic pump, oil control & measuring system, computer etc., internal radial plunger pump output stable and low noise. High integration oil source cabinet, easy operation and observation.
3.7, Measuring and control system include digital servo valve, high accuracy load cell, controller, software, with high stability. Meet the test requirement for cement, concrete of various standard. Function of load close loop control; realize consistent speed control or consistent load control. Computer automatic complete the test, automatic calculate the test result, and print test report. 
3.8, Key part like upper and lower compression platen, columns, position pin hardness above 55HRC.  Surface hard chrome coating ensure the surface smooth and clean, with high anti-abrasion ability and low noise. Can work long life without lubricant oil.

Loadframe,
load cell,
industry computer,
compression platen,
close loop controller,
Software,
unitary oil source cabinet,
English operation manual

ASTM C39 "Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens“
GB/T 17671, GB/T 50081, GB/T2611, GB/T16826 etc.,